Product Reviews

SmallRig Super Clamp Review: A Compact Mounting Base for Camera Accessories

A compact clamp for creators who need to attach compatible camera gear to a narrow bar, shelf, hook, or other firm support.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Super Clamp is a compact mounting base for camera accessories and other gear, with jaws sized for supports between 15 mm and about 40 mm thick.

This SmallRig Super Clamp review looks at its threaded attachment points, padded jaws, and the practical limits to check before building it into a rig.

SmallRig Super Clamp Review Summary

The quick verdict

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for creators who need to attach compatible camera gear to a narrow bar, shelf, hook, or other firm support.

  • Adjustable jaws open to about 40 mm and close to 15 mm, for clamping onto supports within that thickness range.
  • The clamp body includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Rubber pads on the clamp contact surfaces are intended to help prevent slipping and scratching.
  • Construction combines aluminum alloy and stainless steel.

Pros

  • The jaw range supports a variety of bars, shelves, hooks, and other firm surfaces that fit its dimensions.
  • Both 1/4-inch and 3/8-inch threaded holes give buyers useful options for attaching compatible gear.

Consider before buying

  • The clamp only fits supports between 15 mm and about 40 mm thick, so measuring the intended mounting point is essential.
  • Its 3.3-pound maximum weight recommendation calls for care when choosing the attached equipment and its position.
Read the full review summary

This clamp offers a simple way to add a mounting point where a tripod or camera cage is not practical.

Its aluminum alloy and stainless steel construction, rubber pads, and 1/4-inch and 3/8-inch threaded holes make it adaptable to a range of support surfaces and compatible accessories.

It is best suited to a creator who already knows the diameter or thickness of the surface they want to clamp onto and wants a compact base for a camera-related setup.

The jaws open from 15 mm to about 40 mm, and the maximum weight recommendation is 3.3 pounds, so check both the fit and the full load path before mounting equipment.

The buying factors

SmallRig Super Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting versatility

The clamp can attach to varied support types, and its 1/4-inch and 3/8-inch threaded holes provide more than one accessory interface.

7/10

Jaw range

The 15 mm to about 40 mm range covers many bars and edges, though it rules out thinner or thicker supports.

8/10

Accessory compatibility

Two common thread sizes make it easier to pair with compatible camera accessories.

7/10

Contact protection

Rubber pads are intended to reduce slipping and surface scratches, a useful touch for clamping against finished supports.

8/10

Portability

At 0.13 kg and described as compact when folded, it should be convenient to carry as a small rig accessory.

6/10

Load guidance

The 3.3-pound maximum recommendation gives a useful ceiling, but buyers still need to account for the mounted gear and how it is positioned.

Key Features and Specifications of SmallRig Super Clamp

  • Adjustable jaws open to about 40 mm and close to 15 mm, for clamping onto supports within that thickness range.
  • The clamp body includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Rubber pads on the clamp contact surfaces are intended to help prevent slipping and scratching.
  • Construction combines aluminum alloy and stainless steel.
  • The unit weighs 0.13 kg and is described as compact when folded.
  • The maximum weight recommendation is 3.3 pounds; the package includes one super clamp.

Pros and Cons of SmallRig Super Clamp

Pros

  • The jaw range supports a variety of bars, shelves, hooks, and other firm surfaces that fit its dimensions.
  • Both 1/4-inch and 3/8-inch threaded holes give buyers useful options for attaching compatible gear.
  • Padded contact surfaces are a practical consideration when mounting against a finished support.
  • Its 0.13 kg weight makes it a relatively light addition to a camera kit.

Consider before buying

  • The clamp only fits supports between 15 mm and about 40 mm thick, so measuring the intended mounting point is essential.
  • Its 3.3-pound maximum weight recommendation calls for care when choosing the attached equipment and its position.
  • The package includes the clamp only, so any accessory needed to connect a particular device must be sourced separately.

Who Should Buy SmallRig Super Clamp?

Good fit

Consider the SmallRig Super Clamp if you want a compact way to create a mounting point on a bar, shelf edge, hook, or similar support.

Its two thread sizes make it a flexible base for compatible camera gear, while the rubber pads add a protective contact surface.

Before buying, measure the support where the clamp will sit and confirm that it falls between 15 mm and about 40 mm.

Then check the total mounted load against the 3.3-pound maximum recommendation, including how far any accessory extends from the clamp.

Who should skip it

Skip this clamp if your intended support is outside the jaw range or if the mounted setup exceeds the 3.3-pound maximum recommendation.

For heavier or more extended rigs, choose a mounting solution whose load guidance better matches the complete setup.

How the SmallRig Super Clamp fits into a camera rig

Check the support before planning the rig

The jaw range is the first practical constraint: the support needs to be at least 15 mm thick and no more than about 40 mm.

That gives the clamp a range of possible mounting spots, but a quick measurement helps avoid planning around a bar or edge that cannot fit.

Thread options shape accessory choices

The 1/4-inch and 3/8-inch threaded holes let the clamp serve as a base for accessories that use those connections.

Buyers should confirm the thread size and attachment method on each piece of gear before assembling the rig, since the clamp itself is only one part of the connection.

Treat the load recommendation as a setup limit

The 3.3-pound maximum weight recommendation is a useful boundary for deciding whether a camera, light, or other device belongs on this clamp.

The support surface, clamp position, and any extension between the clamp and the device all matter to the overall arrangement, so keep the setup within the recommendation and check that it remains secure.

Padded contact and portability

Rubber pads are designed to reduce slipping and scratching where the jaws meet a surface.

Combined with the 0.13 kg weight and compact folded form, they make this a plausible accessory for a portable kit where mounting flexibility matters.

Alternatives to SmallRig Super Clamp

Camera Mounts & Clamps alternative

SmallRig Double Ball Head Super Clamp Mount
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Super Clamp Mount

Choose the main clamp when you want its 1/4-inch and 3/8-inch threaded holes as a compact base. Consider this alternative if you prefer an included double ball head and action-camera adapter for connecting and positioning compatible devices.

  • This SmallRig mount combines a clamp with a double ball head and a 1/4-inch-20 screw, and includes an action camera mount adapter.
  • Its listed maximum weight capacity is 1.5 kg.
  • The SmallRig Super Clamp is a clamp-only mounting base with 1/4-inch and 3/8-inch threaded holes and jaws that fit supports from 15 mm to about 40 mm thick.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

The main clamp is the simpler choice when you need a mounting base and already have a compatible accessory connection.

Consider the kit if an articulating arm is part of the setup and its wider stated jaw opening better matches your support.

  • This kit pairs a super clamp with a 9.8-inch articulating arm that has 1/4-inch screws at both ends and double 360-degree ball heads.
  • The clamp opens from 15 mm to 54 mm.
  • The SmallRig Super Clamp provides the clamp and threaded attachment points, but the package contains one clamp.

Is SmallRig Super Clamp Worth It?

The SmallRig Super Clamp is worth considering for a compact, adaptable mounting base, especially when its 1/4-inch and 3/8-inch threaded holes match the gear you already own.

Its padded jaws and light weight suit portable camera setups built around compatible support surfaces.

Measure the mounting point first and keep the complete setup within the 3.3-pound maximum weight recommendation.

If you need an articulating arm or a clamp with a wider jaw range, a bundled mounting design may fit your rig more directly.

Your review at a glance

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for creators who need to attach compatible camera gear to a narrow bar, shelf, hook, or other firm support.

  • Adjustable jaws open to about 40 mm and close to 15 mm, for clamping onto supports within that thickness range.
  • The clamp body includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Rubber pads on the clamp contact surfaces are intended to help prevent slipping and scratching.
  • Construction combines aluminum alloy and stainless steel.

Written by

ecofloridamag.com Editorial Team

Editorial team

ecofloridamag.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Super Clamp

SmallRig Super Clamp

A compact clamp for creators who need to attach compatible camera gear to a narrow bar, shelf, hook, or other firm support.

  • Adjustable jaws open to about 40 mm and close to 15 mm, for clamping onto supports within that thickness range.
  • The clamp body includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
Check Video Reviews on Amazon