Product Reviews

SmallRig Cold Shoe Mount 2060 Review

A practical choice for camera cage and rig users who want to add a microphone, flash, or LED through a threaded mount.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount 2060 is a compact way to add a shoe accessory to a camera cage, handle, or plate with a compatible threaded hole.

This SmallRig Cold Shoe Mount review looks at its two-mount pack, included fasteners, and the mounting limits buyers should check before choosing it.

SmallRig Cold Shoe Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical choice for camera cage and rig users who want to add a microphone, flash, or LED through a threaded mount.

  • Two cold shoe mounts are included in the pack.
  • Each mount has a 1/4-inch-20 thread for attachment to compatible camera accessories.
  • The shoe can hold a microphone, flash, or LED light on a camera rig.
  • The mounts are made from aluminum alloy and measure about 25 by 25 mm.

Pros

  • Two mounts provide options for adding accessories at more than one point on a rig.
  • The shoe supports common on-camera accessories such as microphones, flashes, and LED lights.

Consider before buying

  • It is not suitable for DJI or ZHIYUN gimbals.
  • Buyers need to confirm that their cage or accessory has a compatible threaded hole and that the supplied fastening method matches its design.
Read the full review summary

This set is designed for building out a camera rig: each aluminum alloy mount provides a cold shoe for a microphone, flash, or LED, while a 1/4-inch-20 screw attaches the mount to suitable gear.

Two mounts are included, along with M2.5 screws and hex spanners, giving buyers hardware for more than one position or spare mounting flexibility.

It is best suited to users who already have a cage, handle, plate, or other accessory with a compatible threaded hole and want a fixed accessory position.

Check the receiving gear and accessory fit before buying: the product is explicitly unsuitable for DJI and ZHIYUN gimbals, and the instructions describe a different fastening approach for most cages than for the SmallRig Full Cage 1661.

The buying factors

SmallRig Cold Shoe Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

7/10

Rig compatibility

The mount fits accessories with compatible 1/4-inch-20 or M2.5 threaded holes, but specified gimbal exclusions and a cage-specific instruction call for a fit check.

8/10

Accessory versatility

The cold shoe is intended for microphones, flashes, and LED lights, covering several common camera-rig additions.

8/10

Mounting hardware

The package includes 1/4-inch-20 screws, M2.5 screws, and hex spanners for mounting options described in the product details.

6/10

Positioning flexibility

The mount provides an attachment point, while no adjustment mechanism is described; plan on a fixed placement.

8/10

Pack utility

Two mounts make it possible to equip separate positions or keep a second mount available.

8/10

Footprint and material

Each mount measures about 25 by 25 mm and is made from aluminum alloy, a compact format for cage and plate setups.

Key Features and Specifications of SmallRig Cold Shoe

  • Two cold shoe mounts are included in the pack.
  • Each mount has a 1/4-inch-20 thread for attachment to compatible camera accessories.
  • The shoe can hold a microphone, flash, or LED light on a camera rig.
  • The mounts are made from aluminum alloy and measure about 25 by 25 mm.
  • The package includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
  • White arrows indicate mounting orientation, and bent bevels at one end are designed to help prevent accidental removal.

Pros and Cons of SmallRig Cold Shoe

Pros

  • Two mounts provide options for adding accessories at more than one point on a rig.
  • The shoe supports common on-camera accessories such as microphones, flashes, and LED lights.
  • Included screws and spanners support the described mounting configurations.
  • The compact aluminum alloy construction is suited to cage, handle, and plate setups.

Consider before buying

  • It is not suitable for DJI or ZHIYUN gimbals.
  • Buyers need to confirm that their cage or accessory has a compatible threaded hole and that the supplied fastening method matches its design.
  • The mount provides a fixed shoe position; no angle adjustment is described.

Who Should Buy SmallRig Cold Shoe?

Good fit

Consider the SmallRig Cold Shoe Mount 2060 if you are assembling a camera cage or rig and need a straightforward shoe attachment for a microphone, flash, or LED.

Its two-piece pack makes sense when you want to add more than one accessory point or keep a second mount available.

It is also a reasonable fit when your setup has the specified 1/4-inch-20 or M2.5 threaded mounting points and you prefer a small, fixed attachment.

Before purchasing, identify the exact hole and mounting method on your cage, plate, or handle; the instructions say most cages use the included 1/4-inch-20 screw, while the SmallRig Full Cage 1661 uses a different setup involving the M2.5 screws.

Who should skip it

Skip this mount if you need an attachment for a DJI or ZHIYUN gimbal, since those uses are explicitly excluded.

Also look elsewhere if your setup requires an adjustable angle at the mount itself; no angle adjustment is described here.

How the SmallRig Cold Shoe Fits a Camera Rig

Check the threaded connection first

The key compatibility question is the receiving accessory: it needs an appropriate threaded hole, and the product describes both 1/4-inch and M2.5 mounting options.

Confirm the hole size and how much room surrounds it, then follow the cage-specific guidance rather than assuming the same screws apply to every setup.

A shoe for common rig accessories

Once installed, the mount creates a cold shoe position for a microphone, flash, or LED.

That makes it useful for a rig that needs another accessory location, but the description does not specify an adjustment joint, so buyers should plan for the shoe to stay where it is installed.

Two pieces and installation cues

The two-mount pack offers a second attachment point or a spare, and the supplied screws and hex spanners address the listed fastening approaches.

White arrows help identify orientation, while the bent bevels are designed to resist accidental removal; install with the shoe facing the direction that suits your accessory and rig.

Mind the stated exclusions

The product's compatibility notes specifically rule out DJI and ZHIYUN gimbals.

They also distinguish the SmallRig Full Cage 1661 from other cages, so check your precise cage model and its mounting holes before relying on a general compatibility description.

Alternatives to SmallRig Cold Shoe

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter with Shoe Mount 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter with Shoe Mount 1135

Choose the 2060 when you want two fixed shoe mounts and the described threaded mounting options. Consider the 1135 when adjusting an accessory's angle is central to your setup, while keeping its stated weight guidance in mind.

  • The 1135 uses a double ball head that rotates up to 180 degrees and locks with a side wingnut; its shoe base can mount to a cage, handle, plate, or compatible camera.
  • It is not recommended for monitors or LED lights over 1 kg.
  • The SmallRig Cold Shoe Mount 2060 provides a fixed shoe position and comes as a two-mount set for threaded camera accessories.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Cold Shoe Mount Adapter 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Cold Shoe Mount Adapter 3577

The 2060 suits buyers who want two straightforward shoe positions on threaded rig accessories. The 3577 may fit better when a single lightweight accessory needs angle adjustment, provided the device stays within its stated support limit.

  • The 3577 is a 20 g mini ball head that tilts up to 138 degrees and supports devices up to 250 g.
  • It has a 1/4-inch screw on top, a cold shoe base, and a stated anti-scratch pad.
  • The SmallRig Cold Shoe Mount 2060 is a two-piece set for fixed shoe placement, with included screws and spanners.

Is SmallRig Cold Shoe Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering for a camera-rig user who needs compact, fixed shoe positions for a microphone, flash, or LED.

Its two-mount pack and included fasteners make it a practical mounting set when the receiving cage, handle, or plate has compatible threads.

Confirm the exact mounting holes and cage instructions before buying, and avoid it for the specified gimbal systems. If your priority is angle adjustment at the mount, consider a ball-head design instead.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical choice for camera cage and rig users who want to add a microphone, flash, or LED through a threaded mount.

  • Two cold shoe mounts are included in the pack.
  • Each mount has a 1/4-inch-20 thread for attachment to compatible camera accessories.
  • The shoe can hold a microphone, flash, or LED light on a camera rig.
  • The mounts are made from aluminum alloy and measure about 25 by 25 mm.

Written by

ecofloridamag.com Editorial Team

Editorial team

ecofloridamag.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical choice for camera cage and rig users who want to add a microphone, flash, or LED through a threaded mount.

  • Two cold shoe mounts are included in the pack.
  • Each mount has a 1/4-inch-20 thread for attachment to compatible camera accessories.
Check Video Reviews on Amazon